Ekman transport, part of Ekman motion theory first investigated in 1902 by Vagn Walfrid Ekman (for whom it is named), is the term given for the 90 degree net transport of the surface layer (depth to which wind penetrates) due to wind forcings. This phenomenon was first noted by Fridtjof Nansen, who recorded that ice transport appeared to occur at an angle to the wind direction during his arctic expedition during the 1890s.[1] The direction of transport is dependent on the hemisphere. In the northern hemisphere this transport is at a 90 degree angle to the right of the direction of the wind, and in the southern hemisphere it occurs at a 90 degree angle to the left of the direction of the wind.[2]
Contents |
Ekman theory explains the theoretical state of circulation if water currents were driven only by the transfer of momentum from the wind. In the physical world this is difficult to observe due to the presence of many other current driving forces (i.e. pressure and density gradients). Though the following theory technically applies to this ideal situation in which only wind drives circulation, Ekman motion describes the wind driven portion of surface circulation seen in the surface layer.[3][4]
Surface currents flow at a 45 degree angle to the wind due to a balance between the Coriolis force and the drags generated by the wind and the water.[5] If the ocean is divided vertically into thin layers, the magnitude of the velocity (the speed) decreases from a maximum at the surface until it dissipates. The direction also shifts slightly across each subsequent layer (right in the northern hemisphere and left in the southern hemisphere). This is called the Ekman spiral.[6] The layer of water from the surface to the point of dissipation of this spiral is known as the Ekman layer. If all flow over the Ekman layer is integrated, the net transportation is at an angle of 90 degrees to the right (left) of the surface wind in the northern (southern) hemisphere.[2]
Some assumptions of the fluid dynamics involved in the process must be made in order to simplify the process to a point where it is solvable. The assumptions made by Ekman were:[7]
The simplified equations for the Coriolis force in the x and y directions follow from these assumptions:
where is the wind stress, is the density, is the East-West velocity, and is the north-south velocity.
Integrating each equation over the entire Ekman layer:
where
Here and represent the zonal and meridional mass transport terms with units of mass per unit time per unit length. Contrarily to common logic, north-south winds cause mass transport in the East-West direction.[8]
In order to understand the vertical velocity structure of the water column, equations 1 and 2 can be rewritten in terms of the vertical eddy viscosity term.
where is the vertical eddy viscosity coefficient.
This gives a set of differential equations of the form
In order to solve this system of two differential equations, two boundary conditions can be applied:
Things can be further simplified by considering wind blowing in the y-direction only. This means is the results will be relative to a north-south wind (although these solutions could be produced relative to wind in any other direction):[9]
where
By solving this at z=0, the surface current is found to be (as expected) 45 degrees to the right (left) of the wind in the Northern (Southern) Hemisphere. This also gives the expected shape of the Ekman spiral, both in magnitude and direction.[9] Integrating these equations over the Ekman layer shows that the net Ekman transport term is 90 degrees to the right (left) of the wind in the Northern (Southern) Hemisphere.
|